The dermatologically tested Beurer SalonPro System uses innovative IPL (intense pulsed light) light-based technology, which is already used in professional beauty salons and by doctors. Clinically tested technology deactivates the hair follicles to prevent hair growth. Please note that several treatments are necessary to treat all hairs, as only the hairs in the growth phase will react to the treatment.However, a hair reduction of up to 50% is noticeable after just 3-4 treatments. The XXL light area and the flash-glide function are stand-out features that make the device the quickest on the market, taking around just 26 minutes to treat the entire body. The skin-type and skin-contact sensor guarantees exceptional safety during use. The ergonomic, user-friendly shape makes the device ideal for use at home. Dermatological study, 36 women, Institute proDERM Hamburg, study no.
Technology reviewed by the Institution proDERM, Hamburg. At the highest energy level for arms, legs, face, armpits and bikini zone. Sufficient for 40-60 years when used normally. Permanent hair removal with professional technology from the beauty salon. Lifetime flashes--included cartridge with 250,000 light pulses.Fast application--around just 26 minutes to treat the entire body. XXL 7cm² light area for especially fast treatment.
Maximum safety with 2-in-1 skin-type and skin-contact sensor. Auto sensor for individual skin tone detection. Includes precision attachment for treating small areas including the face. The ideal body areas on which to use the Beurer SalonPro System are the legs, under arm, bikini zone, chest, stomach and face below the cheekbones.The device is suitable for both men and women. Depending on the area of the body, treatment takes between 30 seconds and 11 minutes. You can complete a full body treatment in approximately 26 minutes. How does light remove hair?
How does the hair growth cycle influence treatment? The device targets the hair with light pulses. The melanin pigments in the root of the hairs absorb the light and this creates heat.This heat deactivates the hair follicles deep down in the skin to prevent any further growth of the hair. In this context, please note that each hair on your body progresses through three phases of the hair growth cycle: the anagen phase (growth phase), the catagen phase (transitional phase) and the telogen phase (resting phase).
Only hairs that are in the anagen phase respond to treatment with the SalonPro System. Therefore, it is important to note that multiple treatments with the Beurer IPL SalonPro System are needed to treat all hairs.
A complete hair growth cycle is needed to achieve permanent hair removal. How often must I use the SalonPro System? Regular application of the SalonPro System achieves the best results. If you wish to permanently remove hairs on the body, you can achieve the best results with 3-4 treatments carried out every 2 weeks, followed by 3 treatments carried out every 4 weeks.A hair reduction of 50% can be achieved after just the first 3-4 treatments. For facial treatments, you can achieve the best results with 6 treatments carried out every 2 weeks, followed by further treatments every 4 weeks. (A detailed treatment plan can be found in the enlarged image). For Your Safety--Skin Type & Skin Contact Sensor.
The Beurer SalonPro System is equipped with an integrated 2 in 1 skin type and skin contact sensor. Permanent hair removal with IPL is not suitable for a naturally dark skin tone or heavily tanned skin.The SalonPro System is equipped with a skin type sensor that measures skin pigmentation before each light pulse and, for your safety, the device will only emit light pulses if the skin pigmentation is suitable. At the same time, the skin contact sensor protects your eyes by ensuring that light pulses are only emitted when the light area is in full contact with your skin.
The integrated UV filter also protects your skin from harmful rays. The Beurer ProSalon System is suitable for a variety of skin and hair types. It can be used on (naturally) dark blonde, brown and black hair and on light to medium skin tones. It is not effective on very light or grey hair and is unsuitable for very dark skin tones.
A Simple Way to Achieve Permanently Smooth Skin. Using the Beurer SalonPro system is simple--first, ensure your skin and hair type are suitable for treatment.
It is also important that your skin is not sun-burnt or heavily tanned at the time of treatment. Then prepare for treatment by shaving the corresponding areas.
Once the device is plugged in, switch the unit on and select your appropriate energy level. For treatment, position the applicator flat on the treatment area with the handle at a 90 degree angle and press the trigger button. Press and hold the trigger button to activate the flash-glide function.This will automatically trigger a light pulse every three seconds (Brief instructions can be found by enlarging the image). The energy level determines the intensity of the light pulse emitted from the Beurer SalonPro System, which is applied to the skin. The automatic skin tone detection allows you to see the suitable energy level for your skin tone recommended on the device. You can still increase and decrease the energy level at any time by pressing the + and - buttons, however. This makes the light area smaller and allows for a more precise application. The precision attachment can be easily attached to the applicator by positioning it and pushing it on to the light area.
The item "Beurer IPL 10000+ SalonPro Face & Body Lifetime Flashes IPL Hair Removal System" is in sale since Tuesday, August 23, 2016. This item is in the category "Health & Beauty\Shaving & Hair Removal\Laser Hair Removal & IPL". The seller is "brandmovers" and is located in Ruislip. This item can be shipped worldwide.